Image 1 / 7
Brantner E8041
Brantner trailersImplementsBrantner
Price on request
The Brantner E8041 is a single-axle trailer with a three-way tipper, so the load can be unloaded to the rear or to either side, in both directions at an angle of 45°. The gross weight is 8,000 kg and the weight of the trailer itself 1,980 kg. The drawbar load is 1,100 kg, and the floor height with standard wheels is 1,040 mm.
The internal floor dimensions are 4,070 x 2,080 mm. The sides are 500 mm high, and with extension sides of the same height the body capacity is 8.5 m³. The body is raised by one hard-chromed cylinder with stage diameters of 75/90/105 mm and a lift height of 1,400 mm, which requires 10 l of oil. The axle has a diameter of 70 mm, the track width is 1,550 mm, and the standard wheels are 355/60 R18.
Among the Brantner trailers in the range, the E8041 is the only single-axle model and has the lowest gross weight. The TA 14045 XXL and TA 16045 XXL tandem tippers have a gross weight of 13,900 and 16,000 kg respectively, and the Z11045 XXL three-way tipper 11,000 kg, so the E8041 is intended for farms that need a smaller trailer. All specifications
- Made by Brantner
- Advice and support at 5 branches
- Pay in up to 36 instalmentswith Zagrebačka banka cards
- We work with all leasing companies in Croatia
Specifications
| Version | 1 axle, 3-way tipper |
|---|---|
| Gross weight (kg) | 8,000 |
| Trailer weight (kg) | 1,980 |
| Drawbar load (kg) | 1,100 |
| Floor height with std wheels (mm) | 1,040 |
| Internal floor dimensions (mm) | 4,070 x 2,080 |
| Side height (mm) | 500 |
| Extension side height (mm) | 500 |
| Capacity (m³) | 8.5 |
| Axle diameter (mm) | 70 |
| Track width (mm) | 1,550 |
| Number of hard-chromed cylinders | 1 |
| Cylinder stage diameters (mm) | 75/90/105 |
| Lift height (mm) | 1,400 |
| Rear tipping angle (°) | 45 |
| Side tipping angle (°) | 45 |
| Required oil quantity (l) | 10 |
| Standard wheels | 355/60 R18 |
| Version | 1 axle, 3-way tipper |
|---|---|
| Gross weight (kg) | 8,000 |
| Trailer weight (kg) | 1,980 |
| Drawbar load (kg) | 1,100 |
| Floor height with std wheels (mm) | 1,040 |
| Internal floor dimensions (mm) | 4,070 x 2,080 |
| Side height (mm) | 500 |
| Extension side height (mm) | 500 |
| Capacity (m³) | 8.5 |
| Axle diameter (mm) | 70 |
| Track width (mm) | 1,550 |
| Number of hard-chromed cylinders | 1 |
| Cylinder stage diameters (mm) | 75/90/105 |
| Lift height (mm) | 1,400 |
| Rear tipping angle (°) | 45 |
| Side tipping angle (°) | 45 |
| Required oil quantity (l) | 10 |
| Standard wheels | 355/60 R18 |
Need help choosing?
Send an enquiry or give us a call. We will gladly help you choose the right machine and equipment for your work.
Branches and opening hours